The COMPUTHERM WPR-100GE pump controller uses its heat sensor and the immersion sleeve to detect the temperature of the medium standing or flowing in the pipe/boiler. As a result of a temperature change, the controller switch at the set temperature and the 230 V voltage appears at its output. The preassembled connecting cables make it easy to control any circulating pump or other electrical device that is operated by 230 V. The controller can be used to control circulating pumps of both heating and cooling systems, offer the option to select switching sensitivity, and have a pump protection and a frost protection function.

Important functions:

• It turns on/off the pump connected to it based on the set and measured temperature.
• The cables required for commissioning are pre-installed factory accessories.
• With its digital display, you can easily check the settings and the measured temperature.In addition to temperature-based control, it can also be used in manual mode.
• It can be used to control the circulation pump of heating and cooling systems.
• The switching sensitivity can be adjusted as required.
• It has an activateable pump protection function that prevents the pump from sticking.
• It has a frost protection function that can be activated, which prevents damage to the pump in case of light frost