The COMPUTHERM Q32RF thermostat cannot be programmed but it has a clearly visible LCD display that shows the measured and set temperature as well as operational information at the same time. You can easily switch between preset economy and comfort temperatures. Adjustable temperature sensor and switching sensitivity increase comfort. Simple switching between cooling and heating modes ensures usability with heat pumps. The thermostat can be freely moved within the transmission distance, and the connection to the boiler is ensured by a wireless (radio frequency) connection.

We recommend using it in places where programmability is not required, but easy usage, portability, accurate temperature measurement, accurate temperature setting and switching sensitivity is important. If required, the device can be extended with a COMPUTHERM Q1RX wireless thermostat-controlled socket.

Important functions:

• The thermostat is freely portable within range
• Accurate temperature measurement
• Simple switching between comfort and economy temperature
• Selectable switching sensitivity
• Calibration of internal thermometer
• Easy switching between cooling and heating modes
• Clearly visible LCD display that shows the measured and set temperature as well as operational information at the same time

Technical data:

Technical data of the thermostat (transmitter):

• Adjustable temperature range: 5 to 40 °C (in 0.5 °C increments)
• Temperature measurement range: 3 to 45 °C (in 0.1 °C increments)
• Temperature measurement accuracy: ±0.5 °C
• Temperature calibration range: approx. ±3.0 °C
• Selectable switching sensitivity: ±0.1 °C to ±1.0 °C
• Battery voltage: 2 x 1.5 V AA ALKALINE batteries (LR6 type)
• Operating frequency: 868.35 MHz
• Transmission distance: approx. 50 m in open terrain

Technical data of the receiver unit:

• Power supply voltage: 230 V AC, 50 Hz
• Switchable voltage: max. 30 V DC / 250 V AC
• Switchable current: 6 A (2 A inductive load)
• Protection against environmental impacts: IP30